19-08-2019 10:29 AM - edited 19-08-2019 10:30 AM
Hi All,
Using the SAME HDMI cable and HDMI input:
SONY TV
----------------------
PANASONIC 4K TV
--------------------------
with Panasonic + Vodafone I get no picture (nothing, zero, zip, bubkis) and, apparently, no signal over HDMI. My cable is about 10m, but this does not seem to affect any other device.
I have tried a bunch of different options, such as swapping out the HDMI cable, changing the input, using an HDMI cable splitter, but I am getting nowhere. Very frustrating and perplexing.
Any clues?
Thanks
19-08-2019 02:10 PM
@axwaxw What does Panasonic say?
26-09-2019 04:25 PM
12-06-2020 11:07 AM - edited 12-06-2020 11:15 AM
Yes there is an issue with Panasonic TV's with both gen1 and gen 2 Vodafone boxes, you have to set the res to 1080p otherwise you will get it flicking on 4k setting. Is it a problem with Vodafone TV or Panasonc?
Have since spoken to Panasonic they say try changing HDMI modes under settings, HDMI auto setting Mode 1 & Mode 2 try Mode 2....hope that works...
12-06-2020 11:34 AM
There is no known issue with VTV with newer Panasonic TVs, if you use the supplied HDMI cable that came with the STB and ensure HDMI3 is used as the input.
Cheers,
Grant
Copyright © Vodafone New Zealand Ltd